Other

Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip's above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system.

Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.

The Problem Solvers Cross Hanger is the perfect front brake cable hanger for your cyclocross bike with cantilever brakes. Designed for easy installation and maximum braking power, this light, durable aluminum piece is a small but crucial part of your cantilever setup.

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap

Thin, durable clear chainstay protector with extra-strong adhesive. - Overall length - 10.375

The ReMote BarCentric is a dropper lever option for bikes with front shifters, lockout levers, or e-bike controls. The slender design of the ReMote BarCentric allows it to easily fit between the left grip and levers with four potential lever positioning options to avoid any interference with existing levers. This dropper lever has a ring shape that encompasses the handlebar, while also serving as a pivot point to provide the rider with extra leverage, making it easier to press the lever. - Compatible with left side controls including 2x shifters, suspension lockout levers, and under-bar e-bike controls - Large, smooth, sealed Enduro ball bearing that encircles the handlebar - Clean and efficient cable routing flows around disc brake levers - Adjustable reach for ideal ergonomics and controls clearance - Compatible with all cabled actuated dropper posts - Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post - Works with any mountain bike handlebar - Can be rotated to your preferred position

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 36T

Re-engineered clamp with an optimized center-loaded bolt design equalizes load distribution to ease position adjustments. With this clamp set you will be able to clamp metal 7x7mm saddle rails and Specialized FACT carbon 7x9mm saddle rails. - 7x7mm and 7x9mm replacement clamp set for all Specialized road seatposts equipped with a single-bolt cylindrical wedge clamp design - New design clamp for better clamping and non-slipping of the saddle

Benno replacement Seat Collar for Boost E frames.

Have you been looking for a way to take more bikes with you? Perhaps you’d rather bike to your cyclocross races to get warmed up? Or maybe you want to take your kid to the park with their bike to gain confidence before having to battle traffic? Fitting all Mundo V3, V4 and V5 models, the towing tray makes it possible to bring along any bike from a 12-inch up to a 29er, with a tire width of up to a 2.25-inches. It is made out of the same material as our Utility decks: recycled milk jugs. It is durable and tough. A side bumper will keep the towed bike from scratching your Mundo. Towing tray kit includes running board with a slot for front tire, and an adjuster for 20-inch, 16-inch, or 12-inch tires, and bumper. - Includes a Tow Tray + Running Board - Material: HDPE plastic - 2-Year Warranty - Note: Tow Trays are compatible only with the Mundo V4s and V5s

Boda V3 Pegs are the perfect resting place for those little feet aboard the Boda Boda V3. Mounts securely to the side of the frame with the turn of a screw. - Compatible with Boda Boda V3 and elBoda Boda V3 only. - Weight: 1 pound

- Specially shaped composite material helps prevent chain derailment when shifting to inner ring - Split clamp design mounts to specific seat tube diameters, eliminating the need for a metal fitment clamp

- Clamps to a threadless steerer - Offers up to 4-1/2" stem height increase - Forged 6061-aluminum provides extra strength - Machined aluminum top cap is threaded, providing easy installation

IFP Height Tool, (125mm Travel), 2021-on Transfer

38mm Suspension Fork Parts

Shimano Deore XT M8000 chainring bolts. - Color: Black - Material: Aluminum - Type: Torx

Thudbuster 3G Elastomer

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Campagnolo front derailleur parts for repairs.

Campagnolo Cassette Lockrings

RockShox 35mm Seal Kit for repair and maintenance of Rockshox suspension forks.

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk Elastomer 1 - 40 Durometer, X-Soft

Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Bit Size: 4mm - Thread Pitch: M5 - Length: 4x 16mm, 2x 18mm

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

Looking to attach stuff to your SRAM MatchMaker X or Shimano EV mounts? We have just the goods you're looking for. We had an impossible time finding the proper hardware out in the world that we decided to invest in our own tooling and make them ourselves. The kit includes the infamous curved nut and bolt that is required to attach anything to a SRAM MatchMaker X brake lever and also works in Shimano's new EV direct mount standard. *Adapter not included, only nut and bolt in this kit.

Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts

QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool

Shimano STI lever hoods. - Fits Ultegra ST-6700 levers only

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.